Introduction

Difficulty Very Easy Steps 2 Time Required < 5 minutes

Occasionally a camera gets mounted upside down and it isn't installed in a location that can be easily accessed. Fortunately, the HD Multi SeaCam can flip its image around 180° to correct the orientation through the web based user interface.

Step 1 Log into the camera

Consult the quick start guide provided with the camera to get the user name and password for the camera. Connect the camera to a power source and a network switch shared with the workstation you plan to use to change the camera settings. Make sure your camera and workstation are both on the same IP address subnet. The default subnet for the HD Multi SeaCam is 192.168.1.###. Point your browser to the web-based user interface for your camera at htttp://[CAMERA IP ADDRESS]filling in the bracket with the IP address of your camera. The default IP address is 192.168.1.250 Enter the username and password for your camera when prompted in order to complete login.

Step 2 Access the Picture settings menu

Navigate to the Picture submenu To rotate the camera image 180°, change the Flip setting to ON Click on the submit button to save the new settings.