Introduction

Difficulty  Easy Steps 3 Time Required < 5 minutes

This guide explains how to open an HD Multi SeaCam and access its internal microSD card. 

Step 1 Inspection 

Visually inspect camera for signs of damage to the port or housing

Step 2 Remove Snap Ring 

	Gently use the corner edge of the flathead to pry up the end of the snap ring
	Continue to pry up the rest of the ring using the plastic pry tool

Step 3 Remove Endcap and Chassis Assembly

	Locate groove around the connector mount of endcap Gently place edge of plastic tool under the lip of this groove
	Using the lip of the housing as a fulcrum, gently push down on the end of the plastic pry tool The endcap will rise out of the housing as the plastic tool is pushed down
	Gently pull the endcap and the inner chassis out as one piece. Prevent dust and debris from entering the housing by covering it with aluminum foil, parafilm, or similar material.

Next Step